1. 15pc ER40 collet set : 1/8" - 1" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1")

2. All collets are made of high quality alloy spring steel 0.0005" accuracy

3. G6.3 balanced to 12000rpm

4. 1pc CAT40-ER40-80 collet chuck, 15PCS ER40 collets, 1pc ER40 spanner

1. 8 pcs ER32 chucks sets includes the following collet sizes: 5/32" ,1/4",5/16", 3/8", 1/2", 9/16, 5/8" and 3 /4"

2. 1 pcs pull stud, 1 pcs spanner and 1 pcs clamping nut

3. BT40-ER32 chuck holder 

4. Comprehensive accuracy to 0.0003"

5. Balanced to 20000 rpm @ G6.3

6. With fitted case

1. 10pc ER20 collet set : 1/32" - 3/8" by 32th (3/32",1/8",3/16",7/32",1/4",5/16",11/32",3/8",7/16",1/2")

2. All collets are made of high quality alloy spring steel 0.0005" accuracy

3. Hardened and precision ground

4. 1pc R8 collet chuck, 10PCS ER20 collets, 1pc ER20 spanner

5. Fitted plastic case

1. 15pc ER40 collet set : 1/8" - 1" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1")

2. All collets are made of high quality alloy spring steel 0.0005" accuracy

3. Rear Thread is 7/16" - 20

4. 1pc R8-ER40 collet chuck, 15PCS ER40 collets, 1pc ER40 spanner

1. 10pc ER16 collet set : 1/32" - 3/8" by 32th (1/32,1/16,3/32,1/8,3/16,7/32,1/4,5/16,11/32,3/8)

2. All collets are made of high quality alloy spring steel 0.0005" accuracy

3. Hardened and precision ground

4. 1pc 3/4-ER16-3.94" collet chuck, 15PCS ER40 collets, 1pc ER40 spanner

5. Rear thread 3/8" - 16

6. Fitted plastic case

1. 15pc ER40 collet set : 1/8" - 1" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1")

2. All collets are made of high quality alloy spring steel 0.0005" accuracy

3. I.D Thread is 1.041"-24UNF, O.D is 1.238-20UNF

4. 1pc5C-ER40 collet chuck, 15PCS ER40 collets, 1pc ER40 spanner

1. 11pc ER32 collet set : 1/8" - 3/4" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4")

2. All collets are made of high quality alloy spring steel 0.0005" accuracy

3. Rear Thread is 1/2"-13

4. 1pc MT3-ER32 collet chuck, 11PCS ER32 collets, 1pc ER32 spanner

1. 12pc ER32 collet set : 3/32" - 3/4" by 16th (3/32",1/8", 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4")

2. All collets are made of high quality alloy spring steel 0.0005" accuracy

3. Rear Thread is 5/8"-11

4. G6.3 balanced to 12000rpm

5. 1pc CAT-ER32-70 collet chuck, 12PCS ER32 collets, 1pc ER32 spanner

1. T.I.R. ≤ 0.00031" at collet face

2. Through-spindle coolant capability

3. Rear thread for pull stud is 1" - 8

4. Works on all CAT 50 machines

1. Runout: ≤ 0.00031" TIR

2. Pilot Diameter: 1 - 1/4", H5 arbor tolerance

3. Rear thread for pull stud is 1" - 8

4. Meets or exceeds ANSI specifications

1. Runout: 0.00031" TIR

2. Pilot Diameter: 1 1/2", H5 arbor tolerance

3. Rear thread for pull stud is 1" - 8

4. Meets or exceeds ANSI specifications

1. T.I.R. ≤ 0.00031" at collet face

2. Rear thread for pull stud is 1" - 8

3. Balanced to G6.3 at 10000 RPM

4. Works on all CAT50 machines

1. Mount type: Tapered Mount

2. Runout: 0.003" TIR

3. Key style: keyless

4. Clamping range: 1/32"-5/8"

5. Rear thread for pull stud is M24x3

1. Runout: ≤ 0.00031" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 10000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Runout: ≤ 0.00024" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 10000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. T.I.R. ≤ 0.00024" at collet face

2. Rear thread for pull stud is 5/8" - 11

3. Balanced to G6.3 at 10000 rpm

4. Works on all CAT40 machines

1. T.I.R. ≤ 0.00031" at collet face

2. Rear thread for pull stud is 1" - 8

3. Balanced to G6.3 at 10000 rpm

4. Works on all CAT 50 machines

1. T.I.R. ≤ 0.00031" at collet face

2. Rear thread for pull stud is 1" - 8

3. Balanced to G6.3 at 10000 rpm

4. Works on all CAT 50 machines

1. T.I.R. ≤ 0.00031" at collet face

2. Rear thread for pull stud is 1" - 8

3. Balanced to G6.3 at 8000 rpm

4. Works on all CAT 50 machines

1. T.I.R. ≤ 0.00024" at collet face

2. Rear thread for pull stud is 1" - 8

3. Balanced to G6.3 at 10000 rpm

4. Works on all CAT 50 machines

1. Runout: ≤ 0.00024" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 15000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Runout: ≤ 0.00031" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 10000 rpm

4. Hardened and precision taper ground to AT3 accuracy

• Concentricity is less than .00024 at collet face
• Rear thread for pull stud is 1" - 8
• Balanced to G6.3 at 10,000 rpm
• 4. Works on all CAT 50 machines
  

1. T.I.R. ≤ 0.00031" at collet face

2. Through-spindle coolant capability

3. Rear thread for pull stud is 1" - 8

4. Works on all CAT 50 machines

1. Concentricity ≤ 0.00024" at face and arbor

2. Pilot Diameter: 3/4", H5 arbor tolerance

3. Rear thread for pull stud is 1" - 8

4. Gage Length is 3-1/2"

1. Runout: ≤ 0.00031" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 8000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Hole diameter 2-1/2", H5 Hole Tolorance

2. Runout: ≤ 0.00031 TIR and through-spindle coolant capability

3. Rear thread for pull stud is 1"-8

4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder

1. T.I.R. ≤ 0.00031" at collet face

2. Rear thread for pull stud is 1" - 8

3. Balanced to G6.3 at 8000 RPM

4. Works on all CAT50 machines

1. Runout: ≤ 0.00031" TIR

2. Pilot Diameter: 1", H5 arbor tolerance

3. Rear thread for pull stud is 1" - 8

4. Gage length is 2"

4. Nose dia is 2-1/4"

1. Hole diameter 2", H5 Hole Tolorance

2. Runout: ≤ 0.00031 TIR and through-spindle coolant capability

3. Rear thread for pull stud is 1"-8

4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder

1. Hole diameter 1", H5 Hole Tolorance

2. Runout: ≤ 0.00031 TIR and through-spindle coolant capability

3. Rear thread for pull stud is 1"-8

4. Projection is 5-1/2"

5. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder

1. Runout: ≤ 0.00024" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 10000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Runout: ≤ 0.0002" TIR

2. Through-spindle coolant capability

3. Precision balanced to G2.5 @ 20000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Runout: ≤ 0.00024" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 10000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Runout: ≤ 0.0002" TIR

2. Through-spindle coolant capability

3. Precision balanced to G2.5 @ 20000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. T.I.R. ≤ 0.0002" at collet face

2. Rear thread for pull stud is 5/8" - 11

3. Balanced to G6.3 at 15000 rpm

4. Works on all CAT40 machines

1. Runout: ≤ 0.0002" TIR.

2. Through-spindle coolant capability

3. Precision balanced to G2.5 @ 20000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Runout: ≤ 0.00024" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 10000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Runout: ≤ 0.00024" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 15000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. T.I.R. ≤ 0.00024" at collet face

2. Rear thread for pull stud is 1" - 8

3. Balanced to G6.3 at 10000 rpm

4. Works on all CAT 50 machines

1. Mount Type: Tapered Mount

2. Runout: 0.003" TIR

3. Key Style: keyless

4. Clamping Range: 1/8"-5/8"

1. Rear thread for pull stud is 5/8"-11

2. Runout: ≤ 0.0002" TIR

3. Through-spindle coolant capability

4. Gage length is 2-1/4"

5. Collet Chuck accepts all ER16 collets

1. T.I.R. ≤ 0.00031" at collet face

2. Through-spindle coolant capability

3. Rear thread for pull stud is 1" - 8

4. Works on all CAT 50 machines

1. Runout: ≤ 0.00024" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 10000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. T.I.R. ≤ 0.00031" at collet face

2. Rear thread for pull stud is 5/8" - 11

3. Balanced to G6.3 at 8000 rpm

4. Works on all CAT40 machines

1. Runout: ≤ 0.00031" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 8000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Runout: ≤ 0.00031" TIR

2. Through-spindle coolant capability

3. Precision balanced to G6.3 @ 8000 rpm

4. Hardened and precision taper ground to AT3 accuracy

1. Runout: ≤ 0.00031" TIR

2. Pilot Diameter: 1 - 1/4", H5 pilot tolerance

3. Rear thread for pull stud is M16

4. Hardened and precision taper ground to AT3 accuracy

1. Hole diameter 3/4", H5 Hole Tolorance

2. Runout: ≤ 0.00031 TIR and through-spindle coolant capability

3. Rear thread for pull stud is 1"-8

4. Projection is 4-1/2"

4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder