1. Hole diameter 7/16", H5 Hole Tolorance
2. Runout ≤ 0.00024"
3. Rear thread for pull stud is 1" - 8
4. Works on all CAT 50 machines
1. Concentricity ≤ 0.00024" at face and arbor
2. Pilot Diameter: 1-1/2", H5 pilot tolerance
3. Rear thread for pull stud is 1" - 8
4. Gage Length is 2-13/32"
1. Runout: ≤ 0.00031" TIR
2. Pilot Diameter: 2", H5 arbor tolerance
3. Rear thread for pull stud is 1" - 8
4. Meets or exceeds ANSI specifications
1. T.I.R. ≤ 0.00031" at collet face
2. Through-spindle coolant capability
3. Rear thread for pull stud is 1" - 8
4. Works on all CAT 50 machines
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 1" - 8
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT 50 machines
1. T.I.R. ≤ 0.00031" at collet face
2. Rear thread for pull stud is 1" - 8
3. Balanced to G6.3 at 8000 RPM
4. Works on all CAT50 machines
1. Runout: ≤ 0.00031" TIR
2. Pilot Diameter: 1", H5 arbor tolerance
3. Rear thread for pull stud is 1" - 8
4. Gage length is 2"
4. Nose dia is 2-1/4"
1. Concentricity ≤ 0.00024" at face and arbor
2. Pilot Diameter: 3/4", H5 arbor tolerance
3. Rear thread for pull stud is 1" - 8
4. Gage Length is 3-1/2"
1. T.I.R. ≤ 0.00031" at collet face
2. Through-spindle coolant capability
3. Rear thread for pull stud is 1" - 8
4. Works on all CAT 50 machines
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 1" - 8
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT 50 machines
1. T.I.R. ≤ 0.00031" at collet face
2. Rear thread for pull stud is 1" - 8
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT 50 machines
1. T.I.R. ≤ 0.00031" at collet face
2. Rear thread for pull stud is 1" - 8
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT 50 machines
1. T.I.R. ≤ 0.00031" at collet face
2. Rear thread for pull stud is 1" - 8
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT 50 machines
1. Runout: 0.00031" TIR
2. Pilot Diameter: 1 1/2", H5 arbor tolerance
3. Rear thread for pull stud is 1" - 8
4. Meets or exceeds ANSI specifications
1. Runout: ≤ 0.00031" TIR
2. Pilot Diameter: 1 - 1/4", H5 arbor tolerance
3. Rear thread for pull stud is 1" - 8
4. Meets or exceeds ANSI specifications
1. T.I.R. ≤ 0.00031" at collet face
2. Rear thread for pull stud is 1" - 8
3. Balanced to G6.3 at 10000 RPM
4. Works on all CAT50 machines
1. T.I.R. ≤ 0.00031" at collet face
2. Through-spindle coolant capability
3. Rear thread for pull stud is 1" - 8
4. Works on all CAT 50 machines