1. Size MT2 × JT0
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 5/8" straight shank, 33 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 0 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 2 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT2 × JT1
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT2 × JT2
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT2 × JT6
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 3/8" straight shank, 1 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 1 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 3/4" straight shank, 2 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 3/4" straight shank, 3 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 3/4" straight shank, 33 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 5/8" straight shank, 1 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 5/8" straight shank, 2 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 5/8" straight shank, 3 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1" straight shank, 4 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 3/4" straight shank, 1 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT3 × JT6
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT3 × JT2
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 3/8" straight shank, 0 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 3 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1" straight shank, 2 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT3 × JT4
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT3 × JT33
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT4 × JT4
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT4 × JT5
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 3/4" straight shank, 4 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT3 × JT3
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT4 × JT6
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT4 × JT2
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Outside Morse Taper 4
2. Inside Morse taper 3
3. Overall Length 5-33/64"
4. Made of high quality alloy steel, hardened and ground throughout
1. Outside Morse Taper 4
2. Inside Morse taper 2
3. Overall Length 4-7/8"
4. Made of high quality alloy steel, hardened and ground throughout
1. Mount type: taper mounted
2. Runout: 0.003" TIR.
3. Clamping Range: 1/32" - 1/4"
4. Chuck key included
1. Mount Type:JT1 Mount
2. Runout: .003in TIR.
3. Key Style:keyless
4. Clamping Range: 1/32"-1/4" (0.5-6mm)
1. R8 Shank,1 Jacobs Taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. R8 Shank, 4 Jacobs Taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. R8 Shank, 6 Jacobs Taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. R8 Shank, 33 Jacobs Taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Outside Morse Taper 5
2. Inside Morse taper 3
3. Overall Length 6-9/64"
4. Made of high quality alloy steel, hardened and ground throughout
1. Mount type: JT6 taper mounted
2. Runout: 0.003" TIR
3. Clamping range: 1/32" - 1/2"
4. Chuck key included
1. Mount Type: JT6 Mount
2. Runout: .003in TIR.
3. Key Style: keyless
4. Clamping Range: 1/32"-12" (0.5-13mm)
1. Size MT5 × JT6
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT5 × JT4
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT5 × JT5
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT5 × JT33
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT5 × JT2
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Mount type: JT33 taper mounted
2. Runout: .003" TIR
3. Clamping range: 1/32" - 1/2"
4. Chuck key included
1. Mount Type: JT33 Mount
2. Runout: .003in TIR.
3. Key Style: keyless
4. Clamping Range: 1/32"-12" (0.5-13mm)
1. Size MT5 × JT3
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Mount Type:JT6 Mount
2. Runout: .003in TIR.
3. Key Style:keyless
4. Clamping Range: 1/8"-5/8" (1-16mm)
1. Mount type: JT2 taper mounted
2. Runout: 0.003" TIR.
3. Clamping range: 1/32" - 3/8"
4. Chuck key included
1. Hole diameter 3/16", H5 hole tolorance
2. Runout: 0.00031" TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter: 3/8", H5 hole tolorance
2. Runout: 0.00031" TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 3/16", H5 hole tolorance
2. Runout: 0.00031“ TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
1. Mount type: JT3 taper mounted.
2. Runout: .003" TIR.
3. Clamping range: 13/64" - 3/4"
4. Chuck key included
1. Hole diameter 5/8", H5 hole tolorance
2. Runout: 0.00031“ TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
1. Arbor diameter: 3/4", H5 arbor tolerance
2. Style "A" with tanged
3. Gage length is 2.00"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 5/16"
6. Hardened and precision taper ground to AT3 accuracy
1. Arbor diameter: 1", H5 arbor tolerance
2. Style "A" with tanged
3. Projection length is 2-3/4"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 3/8"
6. Hardened and precision taper ground to AT3 accuracy
1. Arbor diameter: 3/4", H5 arbor tolerance
2. Drawbar thread is 5/8"-11
3. Projection length is 2.00"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 5/16"
6. Hardened and precision taper ground to AT3 accuracy
1. Hole diameter 7/8", H5 hole tolorance
2. Runout: 0.00031“ TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
1. Arbor diameter: 1-1/4", H5 pilot tolerance
2. Rear thread for pull stud is 7/16"-20
3. Gage length is 4.00"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 1/2"
6. Hardened and precision taper ground to AT3 accuracy
1. Arbor diameter: 1-1/4", H5 arbor tolerance
2. Style "A" with tanged
3. Projection length is 3-1/2"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 1/2"
6. Hardened and precision taper ground to AT3 accuracy
1. For deep hole machining
2. Shank is 5/8" diameter 3-1/2" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER11 collets
6. Coolant through capability
1. For deep hole machining
2. Shank is 3/4" diameter 2-1/2" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER20 collets
6. Coolant through capability
1. For deep hole machining
2. Shank is 3/4" diameter 2" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER25 collets
1. For deep hole machining
2. Shank is 3/4" diameter 4" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER16 collets
6. Coolant through capability
1. For deep hole machining
2. Shank is 3/4" diameter 3-21/32" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER16 collets
6. Coolant through capability
1. Runout: ≤ 0.0002" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.0002" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. For deep hole machining
2. Shank is 3/4" diameter 4" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER25 collets
6. Coolant through capability
1. Hole diameter 3/16", H5 hole tolorance
2. 0.00031" TIR or better ensure the best possible cutting tool life
3. Drawbar thread: 7/16" - 20
4. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 1/4", H5 Hole Tolorance
2. Runout: ≤ 0.0002'' TIR
3. Rear thread for pull stud is 5/8"-11
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1.This end mill holder accepts all 3/16" shank tooling
2. Runout: .00024" TIR
3. Rear thread for pull stud is 5/8"-11
4. Gage length is 2-1/2"
1. Hole diameter 3/8", H5 hole tolorance
2. Runout: 0.00031" TIR
3. Drawbar thread is 1" - 8
4. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 1/2", H5 hole tolorance
2. Runout: 0.00031" TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 5/8", H5 hole tolorance
2. Runout: 0.00031" TIR
3. Drawbar thread is 1"-8
4. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 3/8", H5 hole tolorance
2. Runout: 0.00031“ TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 1/2", H5 hole tolorance
2. Runout: 0.00031" TIR
3. Drawbar thread is 1" - 8
4. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 5/8", H5 hole tolorance
2. Runout: 0.00031“ TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
No return,no refund after purchase
1. For deep hole machining
2. Shank is 5/8" diameter 3-21/32" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER16 collets
6. Coolant through capability
1. For deep hole machining
2. Shank is 5/8" diameter 3-21/32" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER16 collets
6. Coolant through capability
1. Hole diameter 5/8", H5 hole tolorance
2. 0.00031" TIR or better ensure the best possible cutting tool life
3. Drawbar thread: 7/16" - 20
4. Fit for drilling machine, milling machine CNC chuck or holder
1. R8 outside taper, 2MT inside taper
2. Runout: 0.00031" TIR
3. Drawbar thread size 7/16"-20
4. Precision ground for improved tool life and work piece consistency
1. T.I.R. ≤ 0.0002 at collet face
2. Through-spindle coolant capability
3. Balanced to G6.3 at 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. T.I.R. ≤ 0.0002 at collet face
2. Through-spindle coolant capability
3. Balanced to G6.3 at 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. For deep hole machining
2. Shank is 1" diameter 7-13/64" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER16 collets
6. Coolant through capability
1. Arbor diameter: 1-1/2", H5 pilot tolerance
2. Rear thread for pull stud is 7/16" - 20
3. Gage length is 5.00"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 5/8"
6. Hardened and precision taper ground to AT3 accuracy
1. Arbor diameter: 1", H5 pilot tolerance
2. Rear thread for pull stud is 7/16" - 20
3. Gage length is 3.00"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 3/8"
6. Hardened and precision taper ground to AT3 accuracy
1. Arbor diameter: 1-1/2", H5 arbor tolerance
2. Style "A" with tanged
3. Projection length is 5"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 5/8"
6. Hardened and precision taper ground to AT3 accuracy
1. Arbor diameter: 1-1/4", H5 arbor tolerance
2. Drawbar thread is 5/8" - 11
3. Projection length is 3-1/2"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 1/2"
6. Hardened and precision taper ground to AT3 accuracy
1. Hole diameter 3/4", H5 hole tolorance
2. Runout: 0.00031“ TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 7/8", H5 hole tolorance
2. Runout: 0.00031“ TIR
3. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 3/4", H5 hole tolorance
2. Runout: 0.00031" TIR
3. Drawbar thread is 1" - 8
4. Fit for drilling machine, milling machine CNC chuck or holder
No return,no refund after purchase
1. Hole diameter 7/8", H5 hole tolorance
2. Runout: 0.00031" TIR
3. Drawbar thread is 1" - 8
4. Fit for drilling machine, milling machine CNC chuck or holder
No return,no refund after purchase
1. Hole diameter 1", H5 hole tolorance
2. Runout: 0.00031" TIR
3. Drawbar thread is 1" - 8
4. Fit for drilling machine, milling machine CNC chuck or holder
1. For deep hole machining
2. Shank is 3/4" diameter 6" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER16 collets
1. Hole diameter 7/8", H5 hole tolorance
2. 0.00031" TIR or better ensure the best possible cutting tool life
3. Drawbar thread: 7/16" - 20
4. Fit for drilling machine, milling machine CNC chuck or holder
1. CAT40 outside taper, 3MT inside taper
2. Runout: 0.00031" TIR
3. Drawbar thread size 5/8"-11
4. Precision ground for improved tool life and work piece consistency
1. Arbor diameter: 1", H5 arbor tolerance
2. Style "A" with tanged
3. Projection length is 2-3/4"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 3/8"
6. Hardened and precision taper ground to AT3 accuracy
1. NMTB30 Outside Taper, 2MT Inside Taper
2. Runout: 0.00031" TIR
3. Drawbar Thread Size 1/2"-13
4. Precision Ground for improved tool life and work piece consistency
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. For deep hole machining
2. Shank is 5/8" diameter 6-43/64" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER11 collets
1. For deep hole machining
2. Shank is 1" diameter 6-7/64" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER25 collets
1. For deep hole machining
2. Shank is 1" diameter 6-13/64" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER32 collets
1. Arbor diameter: 1", H5 arbor tolerance
2. Style "A" with tanged
3. Projection length is 3-1/2"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 1/2"
6. Hardened and precision taper ground to AT3 accuracy
1. T.I.R. ≤ 0.00031 at collet face
. Through-spindle coolant capability
3. Balanced to G6.3 at 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. For deep hole machining
2. Shank is 3/4" diameter 7-3/32" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER16M collets
1. For deep hole machining
2. Shank is 1" diameter 7-13/64" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER20M collets
1. For deep hole machining
2. Shank is 1-1/4" diameter 6-7/64" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER25 collets
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. SizeBT30×JT6
2. Hardened and precision ground
3. M12×1.75 drawbar thread
4. Total indicated runout is from 0.00031"
1. For deep hole machining
2. Shank is 1-1/4" diameter 6-13/64" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER32 collets
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. For deep hole machining
2. Shank is 1-1/4" diameter 7-1/4" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER25M collets
1. Size NMTB40×JT2
2. Hardened and precision ground
3. 5/8"-11 drawbar thread
4. Total indicated runout: ≤ 0.00031"
1. Size NMTB40×JT3
2. Hardened and precision ground
3. 5/8"-11 drawbar thread
4. Total indicated runout: ≤ 0.00031"
1. Size NMTB40×JT3
2. Hardened and precision ground
3. 5/8"-11 drawbar thread
4. Total indicated runout: ≤ 0.00031"
1. For deep hole machining
2. Shank is 1" diameter 2-9/16" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER40 collets
6. Coolant through capability
1. T.I.R. ≤ 0.00024 at collet face
2. Through-spindle coolant capability
3. Rear thread for pull stud is 5/8"-11
4. Hardened and precision taper ground to AT3 accuracy
5. Conform to DIN6499
1. Runout: ≤ 0.0002" TIR
2. Pilot Diameter: 1-1/4", H5 arbor tolerance
3. Rear thread for pull stud is 5/8"-11
4. Meets or exceeds ANSI specifications
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: 0.00024" TIR
2. Pilot Diameter: 1", H5 arbor tolerance
3. Rear thread for pull stud is 5/8" - 11
4. Meets or exceeds ANSI specifications
1. Runout: ≤ 0.00024" TIR
2. Pilot Diameter: 1 - 1/4", H5 arbor tolerance
3. Rear thread for pull stud is 5/8" - 11
4. Meets or exceeds ANSI specifications
1. Runout: ≤ 0.00031" TIR
2. Pilot Diameter: 1 - 1/4", H5 arbor tolerance
3. Rear thread for pull stud is 5/8" - 11
4. Meets or exceeds ANSI specifications
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. For deep hole machining
2. Shank is 3/4" diameter 6" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER20 collets
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Pilot Diameter: 3/4", H5 arbor tolerance
3. Rear thread for pull stud is 5/8" - 11
4. Through-spindle coolant capability
1. Runout: ≤ 0.00024" TIR.
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 80000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Hole diameter 1 1/2", H5 hole tolorance
2. 0.00031" TIR or better ensure the best possible cutting tool life
3. Drawbar thread: 7/16"-20
4. Fit for drilling machine, milling machine CNC chuck or holder
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024" TIR
2. Pilot Diameter: 1 - 1/4", H5 pilot tolerance
3. Rear thread for pull stud is 5/8" - 11
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024" TIR
2. Pilot Diameter: 3/4", H5 pilot tolerance
3. Rear thread for pull stud is M16
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Pilot Diameter: 3/4", H5 pilot tolerance
3. Rear thread for pull stud is M16
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024" TIR
2. Pilot Diameter: 1", H5 pilot tolerance
3. Rear thread for pull stud is M16
4. Hardened and precision taper ground to AT3 accuracy
1. Hole diameter 5/8", H5 Hole Tolorance
2. Runout: ≤ 0.00012" TIR
3. Rear thread for pull stud is M12
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Hole diameter 7/16", H5 Hole Tolorance
2. Runout ≤ 0.00024"
3. Rear thread for pull stud is 1" - 8
4. Works on all CAT 50 machines
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.00012 at collet face
2. Through-spindle coolant capability
3. Balanced to G2.5 at 25000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Arbor diameter: 1-1/2", H5 arbor tolerance
2. Style "A" with tanged
3. Projection length is 5"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 5/8"
6. Hardened and precision taper ground to AT3 accuracy
1. Hole diameter 1/2", H5 Hole Tolorance
2. Runout: ≤ 0.00012 TIR and through-spindle coolant capability
3. Rear thread for pull stud is 1/2"-13
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Runout: ≤ 0.00031" TIR.
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Concentricity ≤ 0.00024" at face and arbor
2. Pilot Diameter: 1-1/2", H5 pilot tolerance
3. Rear thread for pull stud is 1" - 8
4. Gage Length is 2-13/32"
1. Hole diameter 1/2", H5 Hole Tolorance
2. Runout: ≤ 0.0002" TIR
3. Rear thread for pull stud is M16
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. T.I.R. ≤ 0.00012 at collet face
2. Through-spindle coolant capability
3. Balanced to G2.5 at 25000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Concentricity is less than .00012 at collet face
2. Through-spindle coolant capability
3. Balanced to G2.5 at 30000 rpm
4. Gage length is 4.00"
5. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR at 4xD
2. Coolant through capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Pilot Diameter: 1", H5 pilot tolerance
3. Rear thread for pull stud is M16
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024" TIR
2. Pilot Diameter: 1 - 1/2", H5 pilot tolerance
3. Rear thread for pull stud is M16
4. Hardened and precision taper ground to AT3 accuracy
1. Rear thread for pull stud is 5/8"-11
2. Runout: ≤ 0.0002" TIR
3. Through-spindle coolant capability
4. Gage length is 2-1/2
5. Collet Chuck accepts all ER20 collets
1. Runout: ≤ 0.00039'' TIR
2. Through-spindle coolant capability
3. Rear thread for pull stud is M16
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.0002" TIR
2. Through-spindle coolant capability
3. Precision balanced to G2.5 @ 20000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. T.I.R. ≤ 0.0002" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 15000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.0002" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 15000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.0002" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 15000 rpm
4. Works on all CAT40 machines
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.0002" TIR
2. Through-spindle coolant capability
3. Precision balanced to G2.5 @ 20000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.0002" TIR
2. Through-spindle coolant capability
3. Precision balanced to G2.5 @ 20000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024'' TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Pilot Diameter: 2", H5 arbor tolerance
3. Rear thread for pull stud is 1" - 8
4. Meets or exceeds ANSI specifications
1. Rear thread for pull stud is 5/8"-11
2. Runout: ≤ 0.0002" TIR
3. Through-spindle coolant capability
4. Gage length is 4"
5. NMTB Collet Chuck accepts all ER20 collets
1. Runout: ≤ 0.0002" TIR.
2. Pilot Diameter: 1 - 1/4", H5 pilot tolerance
3. Rear thread for pull stud is M16
4. Hardened and precision taper ground to AT3 accuracy
1. Hole diameter 1", H5 Hole Tolorance
2. Runout: ≤ 0.0002" TIR
3. Rear thread for pull stud is M16
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. CAT40 outside taper, 4MT inside taper
2. Runout: 0.00031" TIR
3. Drawbar thread size 5/8"-11
4. Precision ground for improved tool life and work piece consistency
1. T.I.R. ≤ 0.00024 at collet face
2. Through-spindle coolant capability
3. Rear thread for pull stud is 5/8"-11
4. Taper ground to high precision AT3 accuracy
1. Hole diameter 3/4", H5 Hole Tolorance
2. Runout: ≤ 0.0002" TIR
3. Rear thread for pull stud is 5/8"-11
4. Gage length is 3-3/4"
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT40 machines
1. Runout: ≤ 0.00024” TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT40 machines
1. Hole diameter 3/8", H5 Hole Tolorance
2. Runout: ≤ 0.00031 TIR and through-spindle coolant capability
3. Rear thread for pull stud is 1"-8
4. Projection is 2-3/4"
5. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Hole diameter 3/8", H5 Hole Tolorance
2. Runout: ≤ 0.00031 TIR and through-spindle coolant capability
3. Rear thread for pull stud is 1"-8
4. Projection is 4-1/2"
5. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Hole diameter 3/4", H5 Hole Tolorance
2. Runout: ≤ 0.00031 TIR and through-spindle coolant capability
3. Rear thread for pull stud is 1"-8
4. Projection is 4-1/2"
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Hole diameter 1", H5 Hole Tolorance
2. Runout: ≤ 0.00031 TIR and through-spindle coolant capability
3. Rear thread for pull stud is 1"-8
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Runout: ≤ 0.00031" TIR
2. Pilot Diameter: 1 - 1/4", H5 pilot tolerance
3. Rear thread for pull stud is M16
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00031" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 8000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. T.I.R. ≤ 0.00031" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 8000 rpm
4. Works on all CAT40 machines
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. T.I.R. ≤ 0.00031" at collet face
2. Through-spindle coolant capability
3. Rear thread for pull stud is 1" - 8
4. Works on all CAT 50 machines
1. Rear thread for pull stud is 5/8"-11
2. Runout: ≤ 0.0002" TIR
3. Through-spindle coolant capability
4. Gage length is 2-1/4"
5. Collet Chuck accepts all ER16 collets
1. Mount Type: Tapered Mount
2. Runout: 0.003" TIR
3. Key Style: keyless
4. Clamping Range: 1/8"-5/8"
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 15000 rpm
4. Hardened and precision taper ground to AT3 accuracy