1. Hole Diameter: ER40-23PCS(4mm-26mm), overall length is 1.811"
2. Clamping Range: 4mm-26mm (0.157"-1.023")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. TIR: ≤0.0002"
2. Material: 20CrMnTi
3. Works on all CAT50 Machines
4. Rear thread for pull stud is 1" - 8UNC
5. Hardened to 56 – 60 HRC
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 18,000 rpms
3. Works on all CAT50 Machines
4. Rear thread for pull stud is 1"-8UNC
5. Hardened to 56 – 60 HRC
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 18,000 RPM
3. Works on all CAT50 Machines
4. Rear thread for pull stud is 1"-8 UNC
5. Hardened to 56 – 60 HRC
6. Projection: 6"
1. Hole Diameter: ER20-13PCS(1-13mm), overall length is 1.240"
2. Clamping Range: 1mm-13mm(0.039"-0.512")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. TIR: ≤0.0002"
2. Material: 20 CrMnTi
3. Works on all CAT50 Machines
4. Rear thread for pull stud is 1" - 8UNC
5. Hardened to 56 – 60 HRC
1. TIR: ≤ 0.0002"
2. Material: 20CrMnTi
3. Works on all CAT50 Machines
4. Rear thread for pull stud is 1" - 8UNC
5. Hardened to 56 – 60 HRC
1. TIR: ≤ 0.0002"
2. Material: 20 CrMnTi
3. Works on all CAT50 Machines
4. Rear thread for pull stud is 1" - 8 UNC
5. Hardened to 56 – 60 HRC
1. Hole Diameter: ER11-7PCS(1/16"-1/4"), overall length is 0.708"
2. Clamping Range: 1/16"-1/4"
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. TIR: ≤0.0002"
2. Material: 20CrMnTi
3. Works on all CAT40 Machines
4. Rear thread for pull stud is 5/8" - 11
5. Hardened to 56 – 60 HRC
1. TIR: ≤ 0.0002"
2. Material: 20 CrMnTi
3. Works on all NMTB40 Machines
4. Rear thread for pull stud is 5/8" - 11
5. Hardened to 56 – 60 HRC
6. Projection: 2-3/8"
1. TIR: ≤ 0.0002"
2. Material: 20 CrMnTi
3. Works on all NMTB40 Machines
4. Rear thread for pull stud is 5/8" - 11
5. Hardened to 56 – 60 HRC
6. Projection: 1-1/2"
1. TIR: ≤ 0.0002"
2. Material: 20 CrMnTi
3. Works on all NMTB40 Machines
4. Rear thread for pull stud is 5/8" - 11
5. Hardened to 56 – 60 HRC
6. Projection: 1-19/32"
1. TIR: ≤0.0002"
2. Material: 20CrMnTi
3. Works on all CAT40 Machines
4. Rear thread for pull stud is 5/8" - 11
5. Constructed of alloy steel hardened to 56 – 60 HRC
1. For deep hole machining
2. Shank is 1-1/4" diameter, 6.2" length
3. Material: 20CrMnTi / JIS-SCM415
4. Made from alloy steel hardened to HRC 56-60
5. This tool holder accepts all ER32 collets
6. Run out: ≤0.00008"
1. TIR: ≤ 0.0002"
2. Balanced to G6.3 at 18,000 rpms
3. Works on all CAT40 Machines
4. Rear thread for pull stud is 5/8" - 11
5. Hardened to 56 – 60 HRC
1. TIR: ≤ 0.0002"
2. Balanced to G6.3 at 18,000 rpms
3. Works on all CAT40 Machines
4. Rear thread for pull stud is 5/8" - 11
5. Hardened to 56 – 60 HRC
1. For deep hole machining
2. Shank is 1" diameter 1.96" length
3. Material: 20CrMnTi / JIS-SCM415
4. Made from alloy steel hardened to HRC56-60
5. This tool holder accepts all ER40 collets
6. Run out: ≤0.00008"
1. For deep hole machining
2. Shank is 1" diameter 3.31" length
3. Material: 20CrMnTi / JIS-SCM415
4. Made from alloy steel hardened to HRC56-60
5. This tool holder accepts all ER20M collets
6. Run out: ≤0.00008"
1. For deep hole machining
2. Shank is 1" diameter 5.5" length
3. Material: 20CrMnTi / JIS-SCM415
4. Made from alloy steel hardened to HRC56-60
5. This tool holder accepts all ER20M collets
6. Run out: ≤0.00008"
1. For deep hole machining
2. Shank is 1" diameter 1.96" length
3. Material: 20CrMnTi / JIS-SCM415
4. Made from alloy steel hardened to HRC56-60
5. This tool holder accepts all ER25 collets
6. Run out: ≤0.00008"
1. For deep hole machining
2. Shank is 1" diameter 5.51" length
3. Material: 20CrMnTi / JIS-SCM415
4. Made from alloy steel hardened to HRC56-60
5. This tool holder accepts all ER20 collets
6. Run out: ≤0.00008"