Shopping Cart

0 item $0.00
0

My Cart

Shopping Cart

0 item $0.00
0

My Cart

Shopping Cart

0 item $0.00
0

My Cart

Shopping Cart

0 item $0.00
0

My Cart

Water Type Mold Temperature Controller 12 HP High Accuracy ±0.1℃


TPIN: ED422870M Condition: New
Price:
2205 $2,205.00

Why is our price so low?

Only 1 left in stock. Fulfilled by Toolots.
WARRANTY: 1-YEAR Warranty For Parts, Service and Repair by:yutool

1. Adjustable temperature range: 25℃ ~ 180℃ {77℉ ~ 356℉}
2. Heating medium: water
3. Temperature control tolerance within ±0.1℃
4. Heater: 9KW {12HP}
5. Cooling type: direct cooling.

Other Models Like This Product
Product Description

Improve injection molding efficiency
1. Before plastic injecting, the machine can bring mold to required temperature automatically then keep it. The machine can save the preheating time.
2. Continuous working, keep mold at the required temperature. Even turning off the injecting, no need to reheat mold.
Improve injection molding quality
1. Keep mold at required temperature, plastic products will eliminate sink marks, silver streaking, delaminating, warping etc.
2. Steady temperature will help plastic molding accurate in size and consistent in quality.
Features of the units
1. Choosing water or oil as heating medium depends on your demand.
2. Optional PID temperature controllers are used for accurate control of temperature within ±0.1.
3. Two-part heating structures helps mold reach required temperature quickly. It will save time and power.
Protection Device
1. Power phase inspection device protect pump from reversal and installing alarm indication.
2. Onboard current inspection device protect pump from reversal and installing alarm indication.
3. Water level probe to avoid water shortage and installing alarm indication.

Product Information
Technical Details
ITEM UNIT Model CHW-180
Temperature range
25℃ - 180℃
77℉ - 356℉
Heater Power KW
HP
9
12
Pump Power KW
HP
0.75
1
External Dimensions(L*W*H) mm
inches
498 × 208 × 522 ( Including Truckle)
19-39/64 
× 8-3/16 × 20-35/64
Pump pressure MPa
Psi
0.28
40.6
Cooling way Direct cooling
Mould Coupling Inch 3/8" × 4
Cooling water interface Inch 1/2"
Max.Pump Flow L/min
cuft
56
1.98
Net weight kg
lbs
40
88
Gross weight kg
lbs

50

110

Voltage 230±10%V, 3 phase, 60Hz
Additional Information

Qty:
$2,205.00

In Stock.