Improve injection molding efficiency
1. Before plastic injecting, the machine can bring mold to required temperature automatically then keep it. The machine can save the preheating time.
2. Continuous working, keep mold at the required temperature. Even turning off the injecting, no need to reheat mold.
Improve injection molding quality
1. Keep mold at required temperature, plastic products will eliminate sink marks, silver streaking, delaminating, warping etc.
2. Steady temperature will help plastic molding accurate in size and consistent in quality.
Features of the units
1. Choosing water or oil as heating medium depends on your demand.
2. Optional PID temperature controllers are used for accurate control of temperature within ±0.1℃.
3. Two-part heating structures helps mold reach required temperature quickly. It will save time and power.
1. Power phase inspection device protect pump from reversal and installing alarm indication.
2. Onboard current inspection device protect pump from reversal and installing alarm indication.
3. Water level probe to avoid water shortage and installing alarm indication.
|25℃ - 120℃
77℉ - 248℉
|498 × 208 × 522 ( Including Truckle)
19-39/64 × 8-3/16 × 20-35/64
|Cooling way||Direct cooling|
|Mould Coupling||Inch||3/8" × 4|
|Cooling water interface||Inch||1/2"|
|Voltage||230±10%V, 3 phase, 60Hz|