Shopping Cart

0 item $0.00

My Cart

Shopping Cart

0 item $0.00

My Cart

Shopping Cart

0 item $0.00

My Cart

Shopping Cart

0 item $0.00

My Cart

TONGDA Fully Automatic Extrusion Blow Molding Machine TDB-2000L

585000 $585,000.00
+ Shipping from $2,500.00

Why is our price so low?
$79.99 Flat Rate Next Day Local Delivery (Free Liftgate Service!)

Only 1 left in stock. Fulfilled by Tongda Machinery.
SHIPS WITHIN: 120 DAYS, WARRANTY: 1-YEAR Warranty For Parts, Service and Repair by:yutool

1. The No.1 blow molding machine in China

2. Max. Product Volume: 2000 L

3. Station: Single Station

4. Size of Machine (L × W × H): 452 × 354 × 283 Inches

5. Weight of Machine: 165347 lb

Product Description


1. Electric system:

Mitsubishi PLC system and human-machine interface control (Chinese & English language).  Touch screen operation.  Setting parameters , changing parameters, searching, monitoring, fault diagnosis and other functions are done by the touch screen.  Components are durable.

2. Hydraulic system:

Proportional pressure control.  Using international famous hydraulic components, steady and reliable.

3. Plasticizing  system:

High efficiency of plasticizing mixing screw makes sure the plasticizing fully and evenly.

4. Speed control system:

Variable-frequency speed control and alloy steel hard tooth-face speed reducer.  Speed control steadily.  Low noise.  Durable in use. 

5. Clamping and mold-moving system:

Independent mold-open, mold- close, mold-lock and mold-moving.  Linear ball rolling guide way and microns accuracy.  High precision, convenience, energy saving and no deformation.  TONGDA patent (tie-barless clamping unit and mold-lock system): Independent mold-lock system, mold-lock pressure is big and balance.  It is easy to change the mold and it provides big space. Small cylinder for mold-open and mold-close.  Mold-moving is fast and energy-saving.  Equip robot to take out the products. Steady and safety.

6. Die head:

High quality material, such as 38CrMoAlA, 42CrMoV, 35CrMo, etc.  Precision Machining and heat treatment.

7. Convenient to change mold:

Die head can be adjusted up and down together with the platform.  It can be also adjusted forward and backward (hydraulic control). Leave space for assembling different kinds of mold.  It is convenient to adjust the distance between die head and mold by up and down the die mold.  This can make the flash minimum.

8. Low-energy:

When the speed is about 70%, the energy consumption is about 110KWH.


Product Information
Technical Details
Model / TDB-2000L
Max.Product Volume (gal) 528
Station / Single
Dry cycle (pc/h) 30
Screw Diameter (inch) 4-23/32 × 2
Screw L/D ratio (L/D) 32
Screw drive power (kw) 132 × 2
Screw heating power (kw) 23.6 × 2
No.of heating zone (Screw) (ZONE) × 2
Output of HDPE (lb/h) 772 × 2
Hydraulic pump driving power (kw) 11+15=26
Clamping force (kN) 3000
Platen distance (inch) 1 ft   3-3/4 inch 6 ft   6-47/64 inch
Max.Size of Mold (W*H) (inch) 63 × 79
Capacity of Accumulator head (gal) 26
Max.Die diameter (Single-head) (inch) 59 × 4-23/32
Die heating power(Single-head) (kw) 95
No.of heating zone (Single-head) (ZONE) 30
Blowing pressure (Mpa) 1
Air consumption (cubic ft/min) 176.57
Cooling water pressure (Mpa) 0.4
Water consumption (gal/min) 93
Size of machine(L*W*H) (inch) 452 × 354 × 283
Weight of machine (lb) 154324 - 165347
Additional Information


The price, pictures and parameters are as a reference.  We will recommend the suitable machine for you according to your requirements.  Please provide following information for us and we will contact you as soon as possible.


Picture of product


Volume of product (gal)


Size of product (L*W*H)


Weight of product


The capacity you want


Voltage (V) and frequency (HZ) in your factory


Other requirements


+ Shipping from $2,500.00

In Stock.