Economical, Centrifugal Separator for High-Volume Dust

The Donaldson Torit® Cyclone dust collector is designed specifically for high dust load, high temperature, and product recovery applications. It has a mechanical separator that uses centrifugal force to remove dust particulates from the air in industrial applications. Dusty air enters the cyclone and the dust particles travel around the inner wall of the cyclone. As the particles lose their velocity, they drop lower in the cyclone until they drop into the receptical below.

An economical solution to a wide range of dust collection problems

Excellent for high dust load, high temperature, and product recovery applications

Can be used alone, with optional bag filter assembly, or as a pre-cleaner

Applications from 510 to 22,082 m³/h / 300 to 13,000 cfm

Heavy-duty construction for long life and low maintenance

Meets seismic zone 6.4 and 160.9 km/h / 4 and 100 mph wind load ratings

Removable cone section for easy replacement

Operational Explanation

Dust-laden air enters the unit through the air inlet and is diverted by a helical baffle. Centrifugal force moves the heavy dust to the interior sidewalls and carries them to the base of the unit. Clean air is carried through the inner cylinder and discharges to atmosphere or optional afterfilters.

Shipping Weight: 750 lbs.

Includes: 

All welded construction

208/230/460V, 60Hz, 3 Phase

TEFC*

55 Gal. Drum Base with Flex Hose and Drum Cover

*All 60 Hz motors 1 HP and above are EISA compliant and considered NEMA Premium® per Table 12-12. NEMA Premium is a registered trademark of National Electrical Manufacturers Association.