Only 1 left in stock.
Fulfilled by Faygo Union Machinery.
This item is on display at our China showroom.Click here for hours and location.
SHIPS WITHIN: 90 DAYS, WARRANTY: 1-YEAR Warranty For Parts, Service and Repair by:
1. Cavity: 6
2. Max. Capacity (BPH): 9000 - 10000
3. Max. Bottle Volumes (gal): 1/2
4. Max. Bottle Height (inch): 12-9/10
5. Round Bottle Max. Diameter (inch): 4-3/20
6. Square Bottle Max. Diagonal (inch): 4-1/2
7. Suitable Inner Bottle Neck (inch): 4/5 - 1
8. Max. Perform Length (inch): 5-9/10
9. Total Installation Power (kW): 51
10. Machine Dimension (L x W x H): 169-1/3" x 39-1/3" x 90-1/2"
This pet bottle blowing machine is equipped with automatic perform loading and bottle unloading system. It is applicable for all shapes of drinking water bottles, carbonated bottles and hot filling bottles. FG6 is composed of three modules: preform elevator, perform unscrambler and host machine.
FG6 bottle blowing machine advantages:
1) Servo driving and cam linking blowing section
The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement, equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.
2) Small performs distance heating system
Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption.
Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.
3) Efficient and soft perform inlet system
By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protected.
4) Modularized design conception
Adopt modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.
|Max. Capacity||9000 - 10000BPH|
|Max. Bottle Volumes||2000ml (1/2gal)|
|Max. Bottle Height||328mm (12-9/10")|
|Round Bottle Max. Diameter||105mm (4-3/20")|
|Square Bottle Max. Diagonal||115mm (4-1/2")|
|Suitable Inner Bottle Neck||20 - 25mm (4/5" - 1")|
|Max. Perform Length||150mm (5-9/10")|
|Total Installation Power||51kW|
|Heating Oven Total Power||46kW|
|Heating Oven Real Power||25kW|
|Voltage||440V/220V 3phase 60Hz|
|Allowed Voltage Fluctuation Range||±10%|
|Air Consumption||4m³/min (141-1/4cubic ft/min)|
|Mold Water Pressure||4 - 6bar|
|Mold Water Flow Rate||45L/min (11-9/10gal/min)|
|Oven Water Pressure||4 - 6bar|
|Oven Water Temperature Regulation Range||6 - 13degree (42.8 - 55.4℉)|
|Mold Water Temperature Regulation Range||6 - 13degree (42.8 - 55.4℉)|
|Oven Water Flow Rate||22L/min (5.81gal/min)|
|Machine Dimension (L x W x H)||4.3 x 1 x 2.3m (169-1/3" x 39-1/3" x 90-1/2")|
|Machine Weight||4600kg (10141.26lb)|