Only 1 left in stock.
Fulfilled by Faygo Union Machinery.
SHIPS WITHIN: 60 DAYS, WARRANTY: 1-YEAR Warranty For Parts, Service and Repair by:
1. Cavity: 4
2. Max. Capacity (BPH): 6500 - 7200
3. Max. Bottle Volumes (gal): 1/2
4. Max. Bottle Height (inch): 12-9/10
5. Round Bottle Max. Diameter (inch): 4-3/20
6. Square Bottle Max. Diagonal (inch): 4-1/2
7. Suitable Inner Bottle Neck (inch): 4/5 - 1
8. Max. Perform Length (inch): 5-9/10
9. Total Installation Power (kW): 51
10. Machine Dimension (L x W x H): 123" x 39-1/3" x 90-1/2"
FG4 PET Bottle Blowing Machine Advantages:
1. Servo driving and cam linking blowing section
The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement, equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.
2. Small performs distance heating system
Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption.
Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.
3. Efficient and soft perform inlet system
By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protected.
4. Modularized design conception
Adopt modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.
FG4 PET Bottle Blowing Machine Optional items:
1. Exploded bottles ejection unit
During the blowing process, if the bottle burst, bad bottles can be automatically removed. This prevents the bad bottles from entering the filling machine.
2. HP air recovery system
After the bottle blowing, high-pressure air can be recycled and used again for the pre-blowing and machine physical movement.
3. Oven and preform temperature detection system
Detection system detects temperature of oven and the temperature of performs. When the perform temperature does not reach the set blowing temperature, blowing workstation will alarm, not blown.
|Max. Capacity||6500 - 7200BPH|
|Max. Bottle Volumes||2000ml (1/2 gal)|
|Max. Bottle Height||328mm (12-9/10")|
|Round Bottle Max. Diameter||105mm (4-3/20")|
|Square Bottle Max. Diagonal||115mm (4-1/2")|
|Suitable Inner Bottle Neck||20 - 25mm (4/5"-1")|
|Max. Preform Length||150mm (5-9/10")|
|Total Installation Power||51kW|
|Heating Oven Total Power||46kW|
|Heating Oven Real Power||30kW|
|Voltage||440V/220V 3phase 60Hz|
|Allowed Voltage Fluctuation Range||±10%|
|Air Consumption||4m³/min (141-1/4cubic ft/min)|
|Mold Water Pressure||4 - 6bar|
|Mold Water Flow Rate||45L/min (11-9/10gal/min)|
|Oven Water Pressure||4 - 6bar|
|Oven Water Temperature Regulation Range||6 - 13 degree (42.8 - 55.4℉)|
|Oven Water Flow Rate||22L/min (5-4/5gal/min)|
|Machine Dimension (L x W x H)||3.3 x 1 x 2.3m (123 x 39-1/3 x 90-1/2inch)|
|Machine Weight||4200kg (9260lb)|