1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3488"-0.3044", Overall Length: 1.06".
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.00059" at 4xD position.
6. Clamping Range: 0.0938"-0.0544", Overall Length: 1.38".
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.4375"-0.3981", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.5625"-0.5231", Overall Length: 1.38".
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRc 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.4375"-0.3981", Overall Length: 1.78".
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1.Works on all BT30 machines
2.Coolant thru capability
3.All critical tool holder surfaces precision ground
4.Tool Holder is Balanced to G2.5 at 25,000 rpm
5.Concentricity is less than 0.0001" at collet face
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT40 Machines
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT40 Machines
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0001"
2. Works on all NMTB40 Machines
3. Standard with AD coolant entry
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT40 Machines
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT40 machines
1.Works on all BT40 machines
2.Coolant thru capability
3.All critical tool holder surfaces precision ground
4.Tool Holder is Balanced to G6.3 at 15,000 rpm
5.Concentricity is less than 0.0001" at collet face
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT40 machines
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. Fit for Kilowood 21CD40-HBA44-70.
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. Fit for Kilowood 21CD25-HBA20-60 & 21CD25-HBA27-50.
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Made from alloy steel for excellent vibration control.
2. Inserts are not included but available (XC..1204..).
3. All critical surfaces precision ground.
4. Suitable for most face milling applications on steel, stainless steel, and cast iron.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. Fit for Kilowood 21CD50-HBA55-80.
4. Connection mechanism is based on a simple design but assures strong face contact.
5. Rear thread for pull stud is 5/8" - 11
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. Comes in a plastic collet box.
2. Total runout less than 0.0003" on these precise ER11 collets.
3. The following sizes are included ER11-1/4, ER11-3/16, ER11-7/32, ER11-5/32, ER11-1/8, ER11-32/3, ER11-1/16
4. It can be widely used for boring, milling, drilling and tapping operation.
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤ 0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT50 machines
1. TIR: 0.0001" or better
2. Balanced to G2.5 at 15,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. TIR: ≤ 0.0001" at collet face
2. Balanced: Up to G2.5 20,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT50 machines
1. TIR: 0.0001" or better
2. Balanced to G2.5 at 15,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. ≤TIR: 0.0001"
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT50 machines
1. TIR: ≤ 0.0001"
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT50 machines
1. CAT40 tool holder
2. 90° end mill cutter
3. Made from alloy steel for excellent vibration control.
4. All critical surfaces precision ground.
5. Suitable for most end milling applications on titanium alloy.
1. CAT40 tool holder
2. 45° face mill cutter
3. HOKU0806 insert
4. Made from alloy steel for excellent vibration control
5. All critical surfaces precision ground
6. Suitable for most face milling applications on stainless steel