1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOGX09..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. CAT40 tool holder

2. 45° face mill cutter

3. HOGX0906 insert

4. Made from alloy steel for excellent vibration control

5. All critical surfaces precision ground

6. Suitable for most face milling applications on cast iron

1. CAT40 tool holder

2. 45° face mill cutter

3. HOKU0806 insert

4. Made from alloy steel for excellent vibration control

5. All critical surfaces precision ground

6. Suitable for most face milling applications on stainless steel

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOGX09..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (AP..1604..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (AP..1604..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. CAT40 tool holder

2. 90° end mill cutter

3. Made from alloy steel for excellent vibration control.

4. All critical surfaces precision ground.

5. Suitable for most end milling applications on titanium alloy.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOKU0806..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOKU0806..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOGX09..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Octagonal double side insert with 12 cutting edges to maximize cost effectiveness.

2. 0.138" Maximum depth of cut.

3. 0.25" Extra thick insert body to withstand high impact cutting environment

4. K class tolerance combined with face mill to achieve 0.001" axial runout

1. HOGX0906ANSN-UM CKM15A Milling Insert 10 pieces

2. for Cast Iron

1. GE22D200N020-MM PPG35 Grooving Insert 10 pieces
2. for Steel, Stainless Steel and Cast Iron

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOKU0806..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOKU0806..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOKU0806..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOGX09..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOKU0806..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. GE25D500N250-M PPG35 Grooving Insert 10 pieces
2. for Steel, Stainless Steel and Cast Iron

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (AP..1604..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. SNMG190616-PR CP110 Turning Insert 10 pieces

1. TIR: ≤ 0.0001"

2. Balanced: Up to G2.5 15,000 rpm

3. Coolant-thru: thru-tool coolant

4. Works on all BT50 machines

1. TIR: ≤0.0001" at collet face

2. Balanced: Up to G2.5 15,000 rpm

3. Coolant-thru: thru-tool coolant

4. Works on all BT50 machines

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (AP..1604..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (HOKU0806..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. ≤TIR: 0.0001"
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry

1. TIR: 0.0001" or better
2. Balanced to G2.5 at 15,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry

1. Insert fits on all of our Shell Mills and End Mills 90 deg rectangle.

2. Corner radius is .016.

3. CKM15 grade is ideal for cast iron.

4. This insert has 2 cutting edges.

1. TIR: ≤ 0.0001" at collet face

2. Balanced: Up to G2.5 20,000 rpm

3. Coolant-thru: thru-tool coolant

4. Works on all BT50 machines

1. TIR: 0.0001" or better
2. Balanced to G2.5 at 15,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry

1. TIR: ≤0.0001" at collet face

2. Balanced: Up to G2.5 15,000 rpm

3. Coolant-thru: thru-tool coolant

4. Works on all CAT50 machines

1. TIR: ≤ 0.0001" at collet face

2. Balanced: Up to G2.5 15,000 rpm

3. Coolant-thru: thru-tool coolant

4. Works on all BT50 machines

1. TIR: ≤0.0001" at collet face

2. Balanced: Up to G2.5 15,000 rpm

3. Coolant-thru: thru-tool coolant

4. Works on all CAT50 machines

1. TIR: ≤0.0001" at collet face

2. Balanced: Up to G2.5 15,000 rpm

3. Coolant-thru: thru-tool coolant

4. Works on all CAT50 machines

1. Made from alloy steel for excellent vibration control. 

2. All critical surfaces precision ground. 

3. Made from alloy steel for excellent vibration control. 

4. Torx wrench and insert screws are included. 

5. Inserts are not included but available (APKT APMT APET APHT 1003).

1. SNMG150612-PR CP125 Turning Insert 10 pieces
2. for Steel

1. DNMG110404-UM CP110 Turning Insert 10 pieces
2. for Steel

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (XC..1204..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability

1. Comes in a plastic collet box.

2. Total runout less than 0.0003" on these precise ER11 collets.

3. The following sizes are included  ER11-1/4, ER11-3/16, ER11-7/32, ER11-5/32, ER11-1/8, ER11-32/3, ER11-1/16

4. It can be widely used for boring, milling, drilling and tapping operation.

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability

1. Accurate repeatability within 0.0012".

2. Free to assemble for required cutting depth and diameter.

3. Fit for Kilowood 21CD50-HBA55-80.

4. Connection mechanism is based on a simple design but assures strong face contact.

5. Rear thread for pull stud is 5/8" - 11

1. Made from alloy steel for excellent vibration control.

2. Inserts are not included but available (XC..1204..).

3. All critical surfaces precision ground.

4. Suitable for most face milling applications on steel, stainless steel, and cast iron.

1. Accurate repeatability within 0.0012".

2. Free to assemble for required cutting depth and diameter.

3. Fit for Kilowood 21CD25-HBA20-60 & 21CD25-HBA27-50.

4. Connection mechanism is based on a simple design but assures strong face contact.

1. Accurate repeatability within 0.0012".

2. Free to assemble for required cutting depth and diameter.

3. Fit for Kilowood 21CD40-HBA44-70.

4. Connection mechanism is based on a simple design but assures strong face contact.