1. Insert fits on all of our Shell Mills and End Mills 90 deg rectangle.
2. Corner radius is .016.
3. CKM15 grade is ideal for cast iron.
4. This insert has 2 cutting edges.
1. Made from alloy steel for excellent vibration control.
2. All critical surfaces precision ground.
3. Made from alloy steel for excellent vibration control.
4. Torx wrench and insert screws are included.
5. Inserts are not included but available (APKT APMT APET APHT 1003).
1. Made from alloy steel for excellent vibration control.
2. All critical surfaces precision ground.
3. Made from alloy steel for excellent vibration control.
4. Torx wrench and insert screws are included.
5. Inserts are not included but available (APKT APMT APET APHT 1003).
1. Made from alloy steel for excellent vibration control.
2. Inserts are not included but available (AP..1604..).
3. All critical surfaces precision ground.
4. Suitable for most face milling applications on steel, stainless steel, and cast iron.
1.Works on all BT30 machines
2.Coolant thru capability
3.All critical tool holder surfaces precision ground
4.Tool Holder is Balanced to G2.5 at 25,000 rpm
5.Concentricity is less than 0.0001" at collet face
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT40 machines
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. Fit for Kilowood 21CD25-HBA20-60 & 21CD25-HBA27-50.
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. Fit for Kilowood 21CD40-HBA44-70.
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. Fit for Kilowood 21CD50-HBA55-80.
4. Connection mechanism is based on a simple design but assures strong face contact.
5. Rear thread for pull stud is 5/8" - 11
1. CAT40 tool holder
2. 45° face mill cutter
3. HOKU0806 insert
4. Made from alloy steel for excellent vibration control
5. All critical surfaces precision ground
6. Suitable for most face milling applications on stainless steel
1. CAT40 tool holder
2. 45° face mill cutter
3. HOGX0906 insert
4. Made from alloy steel for excellent vibration control
5. All critical surfaces precision ground
6. Suitable for most face milling applications on cast iron
1. CAT40 tool holder
2. 90° end mill cutter
3. Made from alloy steel for excellent vibration control.
4. All critical surfaces precision ground.
5. Suitable for most end milling applications on titanium alloy.
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. CCMT09T308-PMF CP110 Turning Insert 10 pieces
2. for Steel
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT40 Machines
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT40 Machines
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT40 Machines
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. ≤TIR: 0.0001"
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. TIR: 0.0001" or better
2. Balanced to G2.5 at 15,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. TIR: 0.0001" or better
2. Balanced to G2.5 at 15,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. CNMG120404-PM CP110 Turning Insert 10 pieces
2. for Steel
1. CNMG120412-UM CK110 Turning Insert 10 pieces
2. for Cast Iron
1. TIR: ≤ 0.0001"
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT50 machines
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: DCKNR 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: DCLNL 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: DCRNR 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: DDJNL 16-4D
4. Insert not included
1. DNMG110404-UM CP110 Turning Insert 10 pieces
2. for Steel
1. DNMG150608-MM PM120 Turning Insert 10 pieces
2. for Stainless Steel
1. WARRANTY: 1-YEAR
2. Overall Length: 4.5"
3. Model#: DSDNN 12-4B
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: DSDNN 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 4.5"
3. Model#: DTCNN 12-4B
4. Insert not included